In this tutorial, you’ll learn what are EEPROM memories? How do they work? What are their applications? And how to interface the internal EEPROM memory within our PIC Microcontroller chip. We’ll also develop the required firmware drivers for EEPROM memory to perform Write/Read operations at any memory locations we want.
In this tutorial, you’ll learn how DC motors work, How to control both speed & direction of a DC motor. You’ll also get familiar with the required hardware driving circuitry. We’ll develop the required firmware code in order to control a DC motor as a practical Lab at the end of this tutorial
In this tutorial, you’ll learn what is Pulse Width Modulation? What are the applications of PWM? And How to generate PWM signals with PIC Microcontrollers. We’ll discuss the PWM mode and develop the necessary firmware to create an LED Dimmer application
In this tutorial, you’ll get to know what are the CCP modules in PIC Microcontrollers. Their modes of operation (Capture-Compare-PWM), what are the mechanics of operation for each mode, And how to develop the necessary firmware in order to drive the CCP module operation for each mode (Capture-Compare).
In this tutorial, you’ll get to know what are IRQ pins? Why we need them? How to use these pins. We’ll also develop the necessary firmware in order to create IRQ handlers for our PIC Microcontroller chip.
in this tutorial, you’ll learn how ultrasonic sensors work, what are their applications and how to use this sort of sensors with microcontrollers. We’ll also develop the necessary firmware to interface the ultrasonic sensor and display the readings on a breadboard.
In this tutorial, we’ll discuss how to generate accurate time intervals with timer modules using the timer preloading technique. You’ll learn both how to measure and eliminate error in timer output intervals
Is this tutorial, we’ll discuss why to use timers instead of delay? What are the drawbacks of using time delays within your main loop? These questions will be addressed and answered in this short tutorial,
